Product code
BV22
iTeka
BV22: Pole-mounted floodlight - Warm White - ST1-BIREGIME street optic
Attention! Code no longer in production
Technical description:
Outdoor, pole-mounted luminaire with high, visual comfort, downlight and street optic G4, designed for use with LED lamps. The optical assembly and the pole attachment system are made of EN1706AC 46100LF aluminium alloy and subjected to a multi-step, pre-treatment process, in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-structured silane layer). The painting stage consists of a primer and a liquid acrylic paint, cured at 150 °C, with a high level of weather and UV ray resistance. 4 mm thick, transparent, sodium-calcium tempered glass closure, joined to the frame with silicone. The frame is secured to the optical assembly with two AISI 304 stainless steel, captive screws and an AISI 303 stainless steel hinged pin with a 50 Shore silicone gasket between them. The device can be adjusted vertically by +45°/-60° and 337° horizontally with a mechanical locking mechanism for precision aiming. The body and frame include slots for rainwater drainage. The product consists of a die-cast aluminium alloy base fitted with a PG 11, EPDM, double cable gland for pass-through wiring. Complete with circuit having Warm White monochrome LEDs and silver aluminium reflectors. Replaceable LEDs. BIREGIME 100%_50% electronic control gear. Control gear, connected using quick-couplings and removed using clips.  Replaceable control gear. There is no light dispersion into the upper hemisphere above this luminaire when it is in a horizontal position (in compliance with the strictest standards for the prevention of light pollution). All external screws are made of stainless steel.
Installation:
The floodlight can be installed with a pole-top (single and double) using a die-cast aluminium cylinder. Available diameters: 60 and 76mm. Secured to pole by two bolts and two safety locking nuts.
Colour:
Grey (15)
Weight (Kg):
2
Mounting:
wall arm|wall surface|ground spike
Wiring:
Luminaire with electromagnetic control gear fixed to the body by means of an aluminium plate and connected to the LED circuit with quick-couplings. Resistance to mains voltage peaks of up to 4KV (with varistor).
Notes:
Fitting complete with lamp
Class II;750°C;IK09;IP66
ENEC-03
Product configuration: BV22
BV22: Pole-mounted floodlight - Warm White - ST1-BIREGIME street optic
Product characteristics:
Total lighting output [Lm]: 2470
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 23.3
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 106
Voltage [V]: -
Life Time: 100,000h - L90 - B10 (Ta 25°C)
Life Time: 100,000h - L90 - B10 (Ta 40°C)
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 100
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 3.3
Nominal power [W]: /
Colour temperature [K]: 3000
Nominal luminous [Lm]: /
CRI: 70
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: 3