Product code
X741
Wireless DALI
X741: CL II BLE-DALI 32 interface for outdoor use and Connected Poles with double access door and a Ø159/194/219 mm base.
Technical description:
Box with Bluetooth-DALI interface for Quick BLE system. Operates with the "iGuzzini Smart Light 2" app<BR>
Specific component for Class II systems.BR>
Allows single and group checks and 32 DALI address broadcasts -
Settable weekly schedulers: using a bridge for this function is mandatory - code ZQV4 (IP20) and a WiFi network for synchronisation.<BR>
Input voltage: 220-240 Vac, 50/60 Hz -
High degree of surge protection, uses a dedicated SPD, 10 kV differential mode protection -
Inrush current: 20 A -
Consumption: 1 W (typical) ; 3 W (max in transmission) -
Checks up to n. 32 DALI addresses - DT6/DT8 (TW) -
DALI bus current: max 160 mA -
Low Energy Bluetooth frequency: 2.4 GHz - BLE 5.2 -
Transmission power: 8 dBm (max) - 
Operation in mesh network-
Update via OTA (over the air) -
Operating temperature: -20 +50 °C<BR>
Integrated Beacon that can be activated to enable smart services likePush Notification with Jiminy system - 
Available protocols: iBeacon, Eddystone, AltBeacon.
Installation:
The Box must be installed inside iGuzzini Connected Poles with twin access covers and a Ø159/194/219 mm base. It cannot be installed on unspecified poles.<BR>
To install it inside the pole, the X743 bracket (not included) must be used.<BR>
The box can also be used externally as a BLE-DALI check interface with a high degree of surge protection (an IP66 rating is obtained thanks to an antenna inside the box and a cap on the relative cable clamp).
Colour:
Indeterminate (00)
Weight (Kg):
0.64
Wiring:
Box fitted with cable clamps:<BR>
- 1 PG16 for power supply input from below (cable: min 7-max 16 mm).<BR>
- 2 side PG13.5 for power supply output+DALI (cable: min 6-max 12 mm).<BR>
- 1 upper connector for BLE antenna output.<BR>
- 1 connector for connecting to the earth screw included on the pole.<BR>
The cable clamps are fitted with endcaps in case they are not used.
Notes:
Maximum radius of action between poles with boxes installed inside them:<BR>
- Connected Poles with standard access door: 25 m in a straight line with no obstacles.<BR>
- Connected Poles with access door fitted with a flush-mounted antenna: 50 m in a straight line with no obstacles.<BR>
Maximum radius of action between boxes used an external interface: 50 m in a straight line with no obstacles.<BR>
In all cases, the maximum distance is affected by the presence of physical obstacles, like concrete, brick or metal panel walls.
Class II;IP22;IP66 ()
CE;UKCA