Product code
S227
Agorà
S227: Spotlight with bracket (to be ordered separately) - Neutral White LED - CRI 80 - Remote power supply - ST1 optic - Class I
Technical description:
Spotlight designed to use LED lamps and an ST1 optic. Consists of a die-cast aluminium optical assembly, steel brackets (both a bracket for the spotlight and a bracket for handle/pole application) and a clear, tempered sodium-calcium safety glass cover. It is fitted with an A2 stainless steel cable gland and a 2x1mm2 section 05RN-F cable. The optical assembly can be adjusted on a horizontal plane at an angle between -50° / +90°. Agorà is fitted with a graduated scale and mechanical locking device for positioning. The street optics system comes complete with a Neutral White monochrome LED circuit. The DALI electronic power supply is remote and can be ordered separately to allow the spotlights to be connected in series. Compatible with programming systems via DALI terminals or an NFC system. The spotlight is fitted with a protection system that in the event of a fault allows all the other products in the same circuit to operate normally. Constant current IP67 class I power supply units must be used (all the information is in the instruction sheet). All external screws used are made of A2 stainless steel.
Installation:
Floor, ceiling, wall or pole-mounted installation.
Colour:
White (01) | Black (04) | Grey (15) | Rust Brown (F5)
Weight (Kg):
5.72
Mounting:
wall surface|ceiling surface|free standing
Wiring:
A2 stainless steel cable gland.
Class I;IK08;IP66
CE;UKCA;ENEC-03;BIS;QCERT;PEP-EPD
Product configuration: S227
S227: Spotlight with bracket (to be ordered separately) - Neutral White LED - CRI 80 - Remote power supply - ST1 optic - Class I
Product characteristics:
Total lighting output [Lm]: 4860
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 38.4
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 126.6
Voltage [V]: -
Life Time: 100,000h - L90 - B10 (Ta 25°C)
Intervallo temperatura ambiente: from -30°C to 35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 100
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 6.4
Nominal power [W]: /
Colour temperature [K]: 4000
Nominal luminous [Lm]: /
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: 3