Product code
MI22
Master Pro Evo KNX
MI22: 12x230 V - 16 A switching actuator with manual mode and current detection
Technical description:
For independently controlling twelve electric loads. The actuator has integrated current detection, able to measure the load current on each channel. All outputs can be controlled using manual switches.
With integrated bus coupler. Connection to line via bus connecting terminal;
a data rail is not necessary. A green LED indicates that the device is ready for operation once the application has been loaded. The load is connected 
using screw terminals.
KNX software functions: operation as break/make contact. Staircase lighting function with/without manual OFF function and cut-out warning. Delay functions. Scenes. Logic function. Priority control or blocking. Status feedback function. Central function with delay. Parametrisation for bus voltage failure and subsequent recovery. Download behaviour.
Current detection function: behaviour when value goes over/drops under the limit value. Count of energy, hours of operation and switching cycles with limit value monitoring.
Intermittent function.
Rated voltage: 230V AC, 50 - 60 Hz
For each switching contact: rated current: 16A, cosφ = 0.6
Incandescent lamps: 230V AC, max. 3600 W
Halogen lamps: 230V AC, max. 2500 W
Fluorescent lamps: 230 V AC, max. 2500 VA with parallel PFC
Capacitive load: 230V AC, 16 A, max. 200 μF
Motor load: 230V AC, max. 1000 W
Current detection load current:
Detection range: 0.1 A to 16 A (actual value sine or DC)
Sensor accuracy: +/-8% of available current value (sine) and +/-100m A
Frequency: 50/60 Hz
Description: 100 mA
Contents: bus connecting terminal and cable cover.
Colour:
Indeterminate (00)
Weight (Kg):
0.3
Notes:
<br>For system composition info, please contact iGuzzini

EAC