Product code
5685
Woody
5685: Projector for application on pole-mounted systems 70 W HIT-DE 70 W HST-DE Road Optic
Attention! Code no longer in production
Technical description:
The fitting can be applied on pole-mounted systems. It is made up of painted die-cast aluminium with closing glass fixed to the frame. The body houses a polished anodised 99.98% superpure aluminium reflector. The optical assembly is equipped with a silicone-front closing glass that guarantees liquid tightness. Special openings in the frame let rain water run off. The fitting has a double cable-clamp (M24x1.5) for through wiring. On MaxiWoody pole-mounted systems it can be adjusted about the vertical axis by means of a bracket with graduated scale for adjustment to 10° and mechanical locking devices guaranteeing the stability of the light beam. The iGuzzini installation and maintenance protocol simplifies installation. The decompression valve facilitates access to the optical assembly by eliminating the problem of lower internal pressure. All components are fixed on a single plate by means of captive screws, enabling rapid non-routine maintenance operations. The painting process is carried out using acrylic paint (maximum protection against UV solar radiation) of liquid kind (maximum protection against atmospheric agent).
Installation:
The fitting can be installed in the FrameWoody and CityWoody systems
Colour:
Grey (15)
Mounting:
ceiling pendant
Notes:
Available accessories: refractor for elliptical distribution of the light flow, coloured filters, round louver, and accessory retention cable.
Class II;IK08;IP67
CE;ENEC-03;IMQ - Performance
Product configuration: 5685+L063
5685: Projector for application on pole-mounted systems 70 W HIT-DE 70 W HST-DE Road Optic
Product characteristics:
Total lighting output [Lm]: 4151
Total luminous flux at or above an angle of 90° [Lm]: 0
Total power [W]: 82
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 50.6
Voltage [V]: 230
Intervallo temperatura ambiente: from -20°C to +35°C.
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 73
Number of lamps for optical assembly: 1
Lamp code: L063
Socket: Rx7s
ZVEI Code: HIT-DE-CE
Ballast losses [W]: 12
Nominal power [W]: 70
Colour temperature [K]: 4200
Nominal luminous [Lm]: 5700
CRI: 92
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: /