Cylindrical pole buried/with plate

All Cylindrical pole

Product Details

Poles made of 70 micron hot-dip galvanised EN10025- S235JR or EN10025-S355JR steel in compliance with the UNI EN ISO 1461 (EN40-5) standard.
The poles are subjected to a hot-dip galvanisation process followed by a pre-treatment for removing organic contaminants.
A chemical treatment is then applied to create the correct level of adhesion for the next phase of powder coating followed by a phase of polymerisation in a ventilated oven to ensure the curing process for the paint film is complete.
The treatment and painting cycle guarantees a C4-H durability class in compliance with the UNI EN ISO 12944 standard.
Treatment and paint cycles with a durability class of C5-H are available on request.
Cylindrical shape with a diameter of - Ø60 - 76 - 102 - 120mm
In the upper part of the poles (codes: 1542-1543) there are six pass-through holes and stainless steel threaded inserts to allow the arm to be fixed with a tie-rod (for Lavinia, Platea Pro, Wow and Street systems).
In poles (codes: 1274-1287-1289-1291-1292) for MultiWoody and MultiPro system applications there are six or eight pass-through holes with a closure stopper for passing through cables.
The buried poles are fitted with a slot for feeding in cables (150x50mm or 62x42mm according to the height of the pole).
Counterplate and anchoring bolts need to be ordered separately
Class II terminal block with single or double fuse holder, four poles with three connections each; and 6 to 16 mm2 input and 2.5 mm2 output cables to be ordered separately (codes 1862 - 1863 - 1864 - 1865).
Terminal blocks code 1862-1864-1865 are IP43 | IK08; terminal blocks code 1863 is IP44 | IK08.
Poles with an IP54 “patch” access cover (132x38mm and 186x45mm) are earthed outside the base of the pole.
Poles with an IP44 flush access cover (310x95mm) are earthed inside.